Syed Irfan

• Review & check engineering design documents
• Procurement of Instruments & bulk material
• Meeting with KNPC multidisciplinary team on project progress.
• Meeting with Vendors and get instruments as per project specifications.

• Handling PMP Pressure Maintenance Plant in JO Oil Fields.
• Handling Preventive, Predictive & Corrective Maintenance activities.
• Handled Plant Upgradation project.
• Participated in HAZOP Study with TUV.
• Review & Checking of datasheets & specification of Control valve, ON Off valves, gauges & transmitters.
• Review & checking of cable schedule, hook up, ILD, wiring & Logic diagrams.
• Review & checking of P&ID, C&E, control narratives, isometric drawings.
• Prepare & send daily plan, daily & monthly report to Client.
• Assigning job to manpower and to make sure job completes as per standard procedure safely.
• Request Work Orders from Operation & close after work is completed.
• Proposing minimum stock level as per the degree of failure.
• Preparing Material Requisition based on requirement in field.
• Configuration & calibration verification of various transmitters & valves.

• Handling PMP Pressure Maintenance Plant in JO Oil Fields.
• Handling Preventive & Corrective Maintenance activities.
• Handled Plant Upgradation project.
• Participate in Hazop study for new projects.
• Prepare & send daily plan, daily & monthly report.
• Assigning job to manpower and to make sure job completes as per standard
procedure safely.
• Request Work Orders from Operation & close after work is completed.
• Proposing minimum stock level as per the degree of failure.
• Preparing Material Requisition based on requirement in field.
• Configuration & calibration verification of various transmitters & valves.

• Maintenance of LPG Trains in KNPC Refinery
• Troubleshooting of Foxboro Evo 2014 & Delta V DCS, Triconex ESD, FGS, BN3500 VMS, Allen Bradley & Siemens s400 plcs
• Handling Preventive, Predictive & Corrective Maintenance using Maximo.
• Proposing minimum stock level as per the degree of failure.
• Configuration & calibration verification of various transmitters & valves.
• Partial & full Stroke Testing of valves.
• Verification & Punch Closing of Foxboro DCS, Triconex ESD, AB PLC & field instruments.
• Loop Check & Functional Testing with Automation Contractor Foxboro and Korean/Japanese contractor JGSK, JGC, GS & SK engineering.
• Calibration & troubleshooting of Fire & Gas Detector System.
• Troubleshooting of instruments & system side.

KIPIC (KUWAIT INTEGRATED PETROLEUM INDUSTRIES COMPANY)
Commissioning Engineer Instrument 1 Sep 2021 to 31 Dec2021
Worked for KIPIC on behalf of KNPC during flight ban. Joined back KNPC after completion of duration.
• Organized Witnessed Function Test of ARU, SWS, SRU, ETP, HPU Plants with FDH(Flour, Daewoo, Hyundai Engineering Co.) on behalf of KIPIC.
• Calibration, troubleshooting, Function Test of Fire & Gas detectors System.
• Troubleshooting of instruments during commissioning, startup & Construction.
• Worked in KIPIC refinery to support SAT, SIT (Software Integration Testing), Commissioning & Startup & Maintenance of Boilers and other Utility Plants.

KNPC (KUWAIT NATIONAL PETROLEUM COMPANY) 26 April 2019 to 11 May 2023
• Maintenance of LPG Trains in KNPC Refinery
• Troubleshooting of Foxboro Evo 2014 & Delta V DCS, Triconex ESD, FGS, BN3500 VMS, Allen Bradley & Siemens s400 plcs
• Handling Preventive, Predictive & Corrective Maintenance using Maximo.
• Proposing minimum stock level as per the degree of failure.
• Configuration & calibration verification of various transmitters & valves.
• Partial & full Stroke Testing of valves.
• Verification & Punch Closing of Foxboro DCS, Triconex ESD, AB PLC & field instruments.
• Loop Check & Functional Testing with Automation Contractor Foxboro and Korean/Japanese contractor JGSK, JGC, GS & SK engineering.
• Calibration & troubleshooting of Fire & Gas Detector System.
• Troubleshooting of instruments & system side.

KIPIC (KUWAIT INTEGRATED PETROLEUM INDUSTRIES COMPANY)
Commissioning Engineer Instrument 1 Sep 2021 to 31 Dec2021
Worked for KIPIC on behalf of KNPC during flight ban. Joined back KNPC after completion of duration.
• Organized Witnessed Function Test of ARU, SWS, SRU, ETP, HPU Plants with FDH(Flour, Daewoo, Hyundai Engineering Co.) on behalf of KIPIC.
• Calibration, troubleshooting, Function Test of Fire & Gas detectors System.
• Troubleshooting of instruments during commissioning, startup & .
• Worked in KIPIC refinery to support SAT, SIT (Software Integration Testing), Commissioning & Startup & Maintenance of Boilers and other Utility Plants.

1 Sep 2021 to 31 Dec2021
• Organized Witnessed Function Test of ARU, SWS, SRU, ETP, HPU Plants with FDH(Flour, Daewoo,
Hyundai) on behalf of KIPIC.
• Calibration, troubleshooting, Function Test of Fire & Gas detectors System.
• Troubleshooting of instruments during commissioning & startup.
• Worked in KIPIC refinery to support SAT, SIT (Software Integration Testing), Commissioning & Startup
& Maintenance of Boilers and other Utility Plants.

Petron is Aramco approved multinational EPC Company.
Project: Aramco Modular Skid Project Engineered by PALL Corps USA.
Project: United Lube Oil Company Expansion & Maintenance Project
Instrument Engineer
• Plant Maintenance.
• Procurement of E&I bulk material.
• Preparation of Loop Folder, Method statement, Test Procedures and ITP etc.
• Handle Third Party & client Inspections as per International/Saudi Aramco standards.
• Installation, Calibration & Testing of field instruments.
• Loop Check & Functional Testing with Automation Contractor Honeywell.
• Preparing Red Mark up drawings as per site requirement.
• Conducting PSSR for MOC if field changes are required.
• Installation of Cable Trays, conduits & Remote IO panel.
• Instrument Cable testing, laying & termination.
• Optical Fiber Cable testing, termination.
• Installation of Fire Alarm system LIFECO UK.
• Installation testing & commissioning of IP type Samsung CCTV system
• Installation & commissioning of Rolling Machine (Made in Italy), Pipe spool machine (Make in China),
Sand Blasting & painting machines (Made in Denmark) projects.
• Backing up PLC files.
• Plant maintenance & in house calibration of instruments & machines.

• Preventive & Corrective Maintenance.
• Procurement of E&I bulk material.
• Preparation of Loop Folder, Method statement, Test Procedures and ITP etc.
• Handle Third Party & client Inspections as per International/Saudi Aramco
standards.
• Installation, Calibration & Testing of field instruments.
• Loop Check & Functional Testing with Automation Contractor Honeywell.
• Preparing Red Mark up drawings as per site requirement.
• Conducting PSSR for MOC if field changes are required.
• Installation of Cable Trays, conduits & Remote IO panel.
• Instrument Cable testing, laying & termination.
• Optical Fiber Cable testing, termination.
• Installation of Fire Alarm system LIFECO UK.
• Installation testing & commissioning of IP type Samsung CCTV system
• Installation & commissioning of Rolling Machine (Made in Italy), Pipe spool machine
(Make in China), Sand Blasting & painting machines (Made in Denmark) projects.
• Backing up PLC files.

Daelim is Korean Multinational Epc Company.
Project: YANBU ARAMCO SINOPEC REFINERY (SAUDI ARAMCO)
Instrument Field Engineer
• Involved in SAT activities like, GA check, IO Check
• Loop Test of DCS, ESD, FGS & package PLC.
• Working as team member designed main cable layout, trench layout, all types of hook ups, logic
diagram, PAS cabinet drawings in Autocad.
• Verification of various vendor documents like Instrument Index, P&ID, Wiring diagram, instrument
data sheet & VMS list.
• Preparation of missed vendor datasheet after analyzing instrument physically.
• Verification & modification of Vendor’s P&ID with master P&ID.
• Verification of Vendor’s wiring diagram with connection list, loop & segment diagrams.
• Verification & modification of Vendor’s wiring diagram with actual junction box wiring.
• Verification of instrument calibration with calibration report.
• Verify Installation & calibration of instruments by subcontractor.
• Update SAT documents like cabinet drawings, FF segment calculator based on, cable pulling list & IO
database.
• IO assignment termination document updating based on punches.

• Involved in SAT activities like, GA check, IO Check
• Loop Test of DCS, ESD, FGS & package PLC.
• Working as team member designed main cable layout, trench layout, all types of
hook ups, logic diagram, PAS cabinet drawings in Autocad.
• Verification of various vendor documents like Instrument Index, P&ID, Wiring
diagram, instrument data sheet & VMS list.
• Preparation of missed vendor datasheet after analyzing instrument physically.
• Verification & modification of Vendors P&ID with master P&ID.
• Verification of Vendors wiring diagram with connection list, loop & segment
diagrams.
• Verification & modification of Vendors wiring diagram with actual junction box
wiring.
• Verification of instrument calibration with calibration report.
• Verify Installation & calibration of instruments by subcontractor.
• Update SAT documents like cabinet drawings, FF segment calculator based on, cable
pulling list & IO database. IO assignment termination

June, 2009 to Nov, 2012
Designation : E&I Maintenance Manager
Brief about Employer: - MEFC is a Saudi-Japanese (Fujikura) partnership located in Riyadh (KSA),
established in 1995 with joint collaboration from Royle Systems Groups, FiberCore, USA. MEFCs
products are tested and international testing laboratories such as BSI, ITS, UL, CSA, Telcordia. MEFC is
certified to ISO9001:2000 QMS by TUV.
Responsibilities:
1. Modifying the Machines, if needed for better performance & reduce downtime.
2. Analyze breakdowns and take corrective action.
3. Manage preventive maintenance periodically using Maintenance Pro CMMS.
4. Proposing minimum stock level as per the degree of failure.
5. Maintaining documents & Handling ISO Audit.
6. Installation and commissioning of machines.
7. Approve outsourced technical services.
8. To Communicate with machine manufacture (mainly USA, Austria etc) to solve all issues of machines.
9. Installed Capacitor bank to correct power factor.
Projects Completed
1. Installation of Optical Fiber Cable Rewinding line machines (Rosendahl Austria).
Description : Rewinding line is machine for rewinding & cable stripping.
The machine is using S7-300 plcs, Wonderware scada, TP170B
Siemens HMI & Master drives & Micro master 440 drives of Siemens.
2. Shifting & reinstallation of Optical Fiber Cable Rewinding line machines (Royle USA).
Description : Rewinding line is machine for rewinding the optical fiber cable.
The machine is using SLC 5/04 plcs, Reliance electric drives &
Dynapar speed controllers.
3. Commissioning of 3000 rpm Coloring line from Medek & SchÖerner (Austria).
Description : The coloring line is the highest speed coloring line available
in the market (3000 mpm) using advanced automation
Systems. Utilizes Omron drives & Ultra violet for curing purpose.
4. Installation of 60 mm Buffering line (Rosendahl Austria).
Description : Buffering line is machine to produce loose tubes in fiber Cable industry. The
machine is using S7-300 plcs, Wonderware scada, TP170B Siemens HMI & Master drives & Micro master
440 drives of Siemens.

1. Modifying the Machines, if needed for better performance & reduce downtime.
2. Analyze breakdowns and take corrective action.
3. Manage preventive & corrective maintenance.
4. Proposing minimum stock level as per the degree of failure.
5. Maintaining documents & Handling ISO Audit.
6. Installation and commissioning of machines.
7. Approve outsourced technical services.
8. To Communicate with machine manufacture (mainly USA, Austria etc) to solve all
issues of machines.
9. Installed Capacitor bank to correct power factor.

Description of Duties: Installation & Maintenance of machines, drives, panels and motors and IJP printing
machine. Installation and commissioning of machines like RBD machine, Armoring machine, Stranding
machine, Extruder machine, Bunching machine, Rewinding machine, Laying machines for cable
Manufacturing.
Projects Completed: Setup of 90 mm Extruder & 65 mm Extruder machines, also setup of annealer in Cu
RBD machine used in power cable plant that manufacture Rubber Cables, XLPE Cables, PVC Cables, and
Control & Power Cables.
Brief about Employer: - Teracom Ltd., Goa is an ISO-9001-2000 and ISO14001-2004.

Description of Duties: Installation Commissioning & Maintenance of machines, drives,
panels and motors
Projects Completed: Setup of 90 mm Extruder & 65 mm Extruder machines, also setup of
annealer in Cu RBD machine used in power cable plant that manufacture Rubber
Cables, XLPE Cables, PVC Cables, and Control & Power Cables. ISO-9001-2000 ISO14001-2004.